215184 433 Revision A
Figure 9.277: John Deere Combine Display
4. Press CALIBRATION icon (A) on the main screen of the
monitor. The CALIBRATION screen appears.
Figure 9.278: John Deere Combine Display
5. Press DIAGNOSTIC READINGS icon (A) on the CALIBRATION
screen. The DIAGNOSTIC READINGS screen appears. This
screen provides access to calibrations, header options, and
diagnostic information.
Figure 9.279: John Deere Combine Display
6. Select AHHC RESUME (A) and a list of calibration options
appears.
SETTING UP AUTO HEADER HEIGHT CONTROL
To Next Page
