215184 448 Revision A
Figure 9.317: John Deere Combine Display
3. Select CALIBRATIONS drop-down menu (A) to view the list
of calibration options.
4. Scroll through the list of options and select REEL POSITION.
5. Press ENTER icon (B).
Figure 9.318: John Deere Control Handle
6. Follow the instructions that appear on the screen. As you
proceed through the calibration process, the display will
automatically update to show the next step. This calibration
requires you to use reel raise (A) and reel lower (B)
switches on the control handle.
Figure 9.319: John Deere Combine Display
7. Press and hold REEL LOWER switch until reel is fully
lowered. Continue holding REEL LOWER switch until
prompted by the display.
SETTING UP AUTO HEADER HEIGHT CONTROL
To Next Page
Loading...
