MacDon D1 Series - Page 475

215184 451 Revision A
1022769
Figure 9.325: John Deere S7 Display – Setting
Header Width
5. Use the on-screen keypad to enter the correct header
width, and then press OK.
1022760
A
Figure 9.326: John Deere S7 Display – Header
Details Window
6. Press window close button (A) in top right corner of the
window to return to the HEADER page.
1026454
A
B
C
D
Figure 9.327: John Deere S7 Display – Header Page
7. Raise/lower speed (A), tilt speed (B), height sensitivity (C),
and tilt sensitivity (D) can all be adjusted from this page.
Select the option you would like to adjust. The following
example shows the raise/lower speed adjustment.
SETTING UP AUTO HEADER HEIGHT CONTROL