MacDon D1 Series - Page 481

215184 457 Revision A
1022786
A
B
Figure 9.339: John Deere S7 Display – Machine
Settings
4. Select MACHINE SETTINGS tab (A).
5. Select CALIBRATIONS & PROCEDURES icon (B). The
CALIBRATIONS & PROCEDURES page displays.
1022789
A
B
Figure 9.340: John Deere S7 Display – Calibrations and
Procedures
6. Select HEADER tab (A).
7. Select FEEDER HOUSE RAISE SPEED CALIBRATION (B). The
FH RAISE SPEED CALIBRATION page displays.
1022793
A
Figure 9.341: John Deere S7 Display – Feeder House
Calibration
8. Select CALIBRATE (A) at the bottom of the page. A
calibration overview displays.
SETTING UP AUTO HEADER HEIGHT CONTROL