215184 458 Revision A
Figure 9.342: John Deere S7 Display – Feeder House
Calibration
9. Read the calibration overview, and then press START.
Figure 9.343: John Deere S7 Display – Feeder House
Calibration
10. Follow the instructions on the screen. As you proceed
through the calibration process, the display will
automatically update to show next step.
Figure 9.344: John Deere S7 Display – Feeder House
Calibration
11. When calibration is complete, select SAVE to confirm
calibration.
SETTING UP AUTO HEADER HEIGHT CONTROL
To Next Page
Loading...
