Olympus 38DL PLUS User Manual

DMTA-10004-01EN, Rev. D, November 2016
Chapter 7 106
Figure 7‑11 Encoded B‑scan main screen
The optional B-scan feature can be activated using a software key. Please contact
Olympus to purchase the encoded B-scan feature.
In order to use the encoded B-scan feature you will need the following:
1. Encoded B-Scan software code (P/N: 38DLP-EBSCAN [U8147018])
2. B-Scan Encoder Buggy (P/N: EP4/ENC [U8780018])
The EP4/ENC is designed to work with the D790 and D790-SM dual element
transducers when the bell housing is not in place.
The D790 and D790-SM are not included with the EP4/ENC.
3. D790 or D790-SM transducer. Please contact Olympus for pricing on longer cables
for the D790-SM transducer.
B-scan
Live A-scan
Min. thickness
Live thickness
B-scan range
Min. marker
Drawing
position
Distance
traveled
B-scan mode
Manual-M
Bi-Dir-B
Uni-Dir-U
Encoder
scanning
direction
NOTE

Olympus 38DL PLUS Specifications

General

Operating Temperature	-10 °C to 50 °C (14 °F to 122 °F)
Data Logger	Yes
Interface	USB, RS-232
Thickness Range	0.08 mm to 635 mm (0.003 in. to 25 in.) depending on material and transducer
Display	Backlit LCD
Battery Type	Three alkaline or NiMH AA cells
Pulser	Adjustable square wave pulser
Receiver Bandwidth	0.5 MHz to 20 MHz
Languages	English, French, German, Spanish, Italian, Russian, Japanese, Chinese
Resolution	0.001 mm or 0.0001 in.
Transducer Frequency	2 MHz to 30 MHz
Material	Plastic housing