Olympus 38DL PLUS - AVG;MIN Measurements and Temperature Compensation

DMTA-10004-01EN, Rev. D, November 2016
Using Advanced Gaging Features 141
Figure 10‑5 The half‑size and full‑size B‑scans
B‑SCAN DIRECTION:
Choose the B-scan direction to match the direction of transducer movement. A
scan direction arrow appears below the left corner of the B-scan display to
indicate the transducer scan direction (see Figure 10-6 on page 141). The data
starts appearing on the screen in the opposite direction.
LEFT TO RIGHT
The transducer scans the part from left to right and the data starts appearing
at the right of the screen and scrolls to the left.
RIGHT TO LEFT
The transducer scans the part from right to left and the data starts appearing
at the left of the screen and scrolls to the right.
Figure 10‑6 B‑scan elements
Half size B-scan
Full size B-scan
Scan direction
(left to right)
Min/Max marker B-scan range
Loss-of-signal (LOS)
indicator
Data scrolls in from
right to left