Olympus 38DL PLUS User Manual

DMTA-10004-01EN, Rev. D, November 2016
Important Information — Please Read Before Use 6
Some of the details of components and/or software images in this manual may differ
from your instrument’s components or software display. However, the principles
remain the same.
The other 38DL PLUS documents are:
38DL PLUS Ultrasonic Thickness Gage — Getting Started (P/N: DMTA-10010-01EN
[U8778357])
A short leaflet containing essential information on how to quickly start operating
the 38DL PLUS instrument.
38DL PLUS Ultrasonic Thickness Gage — Basic Operation Manual (P/N:
DMTA-10009-01EN [U8778346)
A printed document containing a detailed description of the instrument as well as
basic setup and operation procedures.
GageView Interface Program — User’s Manual (P/N: 910-259-EN [U8778347])
The 38DL PLUS also works with the GageView interface program. Refer to this
document for detailed information on GageView. The document is available in
PDF format on the GageView CD and as online help in GageView.
Instrument Compatibility
See “Accessories and Replacement Parts” on page 285 for information on accessories
that are compatible with the 38DL PLUS.
Always use equipment and accessories that meet Olympus specifications. Using
incompatible equipment could cause equipment malfunction and/or damage, or
human injury.
IMPORTANT
CAUTION

Olympus 38DL PLUS Specifications

General

Operating Temperature	-10 °C to 50 °C (14 °F to 122 °F)
Data Logger	Yes
Interface	USB, RS-232
Thickness Range	0.08 mm to 635 mm (0.003 in. to 25 in.) depending on material and transducer
Display	Backlit LCD
Battery Type	Three alkaline or NiMH AA cells
Pulser	Adjustable square wave pulser
Receiver Bandwidth	0.5 MHz to 20 MHz
Languages	English, French, German, Spanish, Italian, Russian, Japanese, Chinese
Resolution	0.001 mm or 0.0001 in.
Transducer Frequency	2 MHz to 30 MHz
Material	Plastic housing