Olympus 38DL PLUS User Manual

DMTA-10004-01EN, Rev. D, November 2016
Accessories and Replacement Parts 285
Appendix C: Accessories and Replacement Parts
Table 42 Software options
Description Part number
Optional Oxide software
(installed in units via activation code)
38DLP-OXIDE [U8147014]
Optional High Resolution software
(installed in units via activation code)
38DLP-HR [U8147015]
Optional Multi-Measurement Software
(installed in units via activation code)
38DLP-MM [U8147016]
Optional High Penetration software
(installed in units via activation code)
38DLP-HP [U8147017]
Table 43 Accessories and replacement parts
Description Part number
Carrying case 38-CC [U8764099]
Protective rubber boot with chest harness 38DLP/RPC [U8779306]
Gage stand EPLTC-PS [U8780044]
Chest harness 441-087 [U8902895]
Rectangular rubber boot rings 412-1061LF [U8907259]
38DL PLUS User’s Manual DMTA-10004-01EN
Interface program CD-ROM (standard) GageView [U8147006]
Batteries Rechargeable lithium-ion battery: 38-BAT
[U8760054]
AA battery holder: 38DLP/AA [U8780290]
Alkaline and NiMH
Remote save/send foot switch 38DLP/RFS [U8780288]

Olympus 38DL PLUS Specifications

General

Operating Temperature	-10 °C to 50 °C (14 °F to 122 °F)
Data Logger	Yes
Interface	USB, RS-232
Thickness Range	0.08 mm to 635 mm (0.003 in. to 25 in.) depending on material and transducer
Display	Backlit LCD
Battery Type	Three alkaline or NiMH AA cells
Pulser	Adjustable square wave pulser
Receiver Bandwidth	0.5 MHz to 20 MHz
Languages	English, French, German, Spanish, Italian, Russian, Japanese, Chinese
Resolution	0.001 mm or 0.0001 in.
Transducer Frequency	2 MHz to 30 MHz
Material	Plastic housing