Olympus 38DL PLUS - Figure 11-3 Example of the CREATE Screen

DMTA-10004-01EN, Rev. D, November 2016
Chapter 11 164
Figure 11‑3 Example of the CREATE screen
At any time, you can press [2nd F], [] or [2nd F], [] to scroll between parameters on
the screen.
• SEQ+CUSTOM PT see “Sequential with Custom
Points Data File Type” on page 168
•2D GRID see “2-D Grid Data File Type” on
page 170
•2D+CUSTOM PT see “2-D Grid with Custom Points
Data File Type” on page 174
•3D GRID see “3-D Grid Data File Type” on
page 176
•BOILER see “Boiler Data File Type” on
page 178
•3D CUSTOM see “3-D Custom File Type” on
page 180
TIP