Olympus 38DL PLUS - Resetting the Communication Parameters; Figure 14-9 Viewing or Changing the File Output Format; Table 26 Default Communication Parameter Values

DMTA-10004-01EN, Rev. D, November 2016
Chapter 14 260
Figure 14‑9 Viewing or changing the file output format
4. Press [MEAS] to return to the measurement screen.
14.7 Resetting the Communication Parameters
The communication reset function quickly returns communication parameters to the
factory default values. This function may be useful when you experience difficulties
to establish the communication with a remote device. Table 26 on page 260 gives the
default values for the communication parameters.
Table 26 Default communication parameter values
Parameter Va lu e
COMM PROTOCOL MULTI CHAR
OUTPUT FORMAT F1
DATABASE TRACKING OFF
B‑SCAN OUTPUT OFF
37DL OUTPUT OFF
CONNECTION TYPE USB