DMTA-10004-01EN, Rev. D, November 2016
Using the Datalogger
205
c) Press [2nd F], [] or [2nd F], [] to move between the #MINS and #MAXS
lists.
d) Select CANCEL to return to the measurement screen or NEW REPORT to
generate another report.
6. In the FILE COMPARISON screen (see Figure 11-33 on page 205):
a) In the upper list, select the reference file that you want to use in the
comparison.
b) In the lower list, select the comparison file (containing newer data for the
same measurement points).
c) Select REPORT.
The FILE COMPARISON report result screen opens with the first maximum
wall loss ID highlighted (see Figure 11-34 on page 206).
Figure 11‑33 The FILE COMPARISON report screen
To Next Page
Loading...
