Olympus 38DL PLUS User Manual

DMTA-10004-01EN, Rev. D, November 2016
Chapter 10 140
Figure 10‑4 Changing B‑scan parameters
The B‑SCAN screen contains the following parameters:
GRID SIZE
Determines the size of the B-scan with the following two options (see Figure 10-5
on page 141):
HALF SIZE
Displays a half-height A-scan waveform and a half-height B-scan.
FULL SIZE
Displays the B-scan over the entire waveform display area.

Olympus 38DL PLUS Specifications

General

Operating Temperature	-10 °C to 50 °C (14 °F to 122 °F)
Data Logger	Yes
Interface	USB, RS-232
Thickness Range	0.08 mm to 635 mm (0.003 in. to 25 in.) depending on material and transducer
Display	Backlit LCD
Battery Type	Three alkaline or NiMH AA cells
Pulser	Adjustable square wave pulser
Receiver Bandwidth	0.5 MHz to 20 MHz
Languages	English, French, German, Spanish, Italian, Russian, Japanese, Chinese
Resolution	0.001 mm or 0.0001 in.
Transducer Frequency	2 MHz to 30 MHz
Material	Plastic housing