Olympus 38DL PLUS User Manual

DMTA-10004-01EN, Rev. D, November 2016
Index 297
Index
Symbols
% total mode, multi-measurement 104
Numerics
2-D grid data file 170
2-D grid with custom points data file 174
3-D grid custom data file 180
3-D grid data file 176
A
AA battery holder 33
AC power 32
cord 23
using 32
accessories and replacement parts 285
acoustic properties of test material 74
activating
DB grid 147
differential mode 114
min/max mode 117
quick setup recall 241
resets 266
software options 92
V-path 216
zoom 58
active file name 77, 159
active ID, changing 199
active measurement 100
adjusting
delay value 58
extended and E1 blanks 83
extended blank with D79X series transducers
137
gain with DE and EMAT transducers 135
update rate 61
waveform parameters 224
advanced gaging functions 135
alarm
setting 122
alarm indicator 41
alarms 117
Alkaline batteries
operating time 34
using 33
arrow keys 27
A-scan 40
associating note to IDs 193
Australia, RCM compliance 4
AUTO E-TO-E 81
AVG/MIN
configuring 153
measuring thickness 155
Avg/Min measurements 153
B
basic operation 63
manual 6
battery
charge 31
charging 34
compartment door 36
full capacity 35
operating time 34
power 33
precautions 10
rechargeable 33

Olympus 38DL PLUS Specifications

General

Operating Temperature	-10 °C to 50 °C (14 °F to 122 °F)
Data Logger	Yes
Interface	USB, RS-232
Thickness Range	0.08 mm to 635 mm (0.003 in. to 25 in.) depending on material and transducer
Display	Backlit LCD
Battery Type	Three alkaline or NiMH AA cells
Pulser	Adjustable square wave pulser
Receiver Bandwidth	0.5 MHz to 20 MHz
Languages	English, French, German, Spanish, Italian, Russian, Japanese, Chinese
Resolution	0.001 mm or 0.0001 in.
Transducer Frequency	2 MHz to 30 MHz
Material	Plastic housing