Olympus 38DL PLUS User Manual

DMTA-10004-01EN, Rev. D, November 2016
Using the Datalogger 167
Figure 11‑4 The CREATE screen for the incremental data file type
11.2.1.2 Sequential Data File Type
The sequential data file type is similar to the incremental type but you can define both
a starting and ending ID numbers. The resulting file is inclusive of the starting and
ending points and all incremental points in between (see examples in Table 13 on
page 167).
Table 13 Resulting ID examples for the SEQUENTIAL file type
START ID END ID Resulting IDs
ABC123 ABC135 ABC123
ABC124
ABC125
...
ABC135
XY-GY XY-IB XY-GY
XY-GZ
XY-HA
...
XY-IB

Olympus 38DL PLUS Specifications

General

Operating Temperature	-10 °C to 50 °C (14 °F to 122 °F)
Data Logger	Yes
Interface	USB, RS-232
Thickness Range	0.08 mm to 635 mm (0.003 in. to 25 in.) depending on material and transducer
Display	Backlit LCD
Battery Type	Three alkaline or NiMH AA cells
Pulser	Adjustable square wave pulser
Receiver Bandwidth	0.5 MHz to 20 MHz
Languages	English, French, German, Spanish, Italian, Russian, Japanese, Chinese
Resolution	0.001 mm or 0.0001 in.
Transducer Frequency	2 MHz to 30 MHz
Material	Plastic housing