Olympus 38DL PLUS User Manual

DMTA-10004-01EN, Rev. D, November 2016
Chapter 11 190
11.3.5 Deleting a Range of IDs
You can delete a range of IDs in the active file using the clear memory function. This
function deletes both the data and the ID number locations for incremental and
manual (built in GageView) data files. For other data file types only the data is
deleted, not the ID number locations.
To delete a range of IDs in a file
1. Open the file from which you wish to delete the data of a range of IDs (see
“Opening a File” on page 184).
2. Press [2nd F], [FILE] (CLR MEM).
3. In the CLEAR ID RANGE, screen (see Figure 11-21 on page 190):
a) Edit the STARTING ID and the ENDING ID values to define the range of
IDs that you wish to delete from the file.
b) Select CLEAR.
Figure 11‑21 Deleting the data of an ID range in the active file
11.3.6 Deleting All Data Files
You can use the reset function to quickly erase all the files stored in the 38DL PLUS.

Olympus 38DL PLUS Specifications

General

Operating Temperature	-10 °C to 50 °C (14 °F to 122 °F)
Data Logger	Yes
Interface	USB, RS-232
Thickness Range	0.08 mm to 635 mm (0.003 in. to 25 in.) depending on material and transducer
Display	Backlit LCD
Battery Type	Three alkaline or NiMH AA cells
Pulser	Adjustable square wave pulser
Receiver Bandwidth	0.5 MHz to 20 MHz
Languages	English, French, German, Spanish, Italian, Russian, Japanese, Chinese
Resolution	0.001 mm or 0.0001 in.
Transducer Frequency	2 MHz to 30 MHz
Material	Plastic housing