Network Communications
6
6.2 Field Bus Network Support
SIEPCYEUOQ2V01A Q2V Technical Manual 189
6.2 Field Bus Network Support
You can use the PLC to control and monitor the drive through the network. The drive has a standard RS-485
interface (Modbus communications). Install a separately sold communication option on the drive to support other
network communications.
◆ Available Communication Options
Contact the manufacturer or your nearest sales representative to order a communication option.
Table 6.1 Available Field Bus Network
Type of Communications Option model
EtherCAT SI-ES3
PROFINET SI-EP3
EtherNet/IP SI-EN3
To Next Page
Loading...
Need help?
General