Omron Q2V Series User Manual

11.1 How to Read the Parameter List
314 SIEPCYEUOQ2V01A Q2V Technical Manual
11.1 How to Read the Parameter List
◆ Icons and Terms that Identify Parameters and Control Modes
Icon Description
The parameter is available when operating the drive with V/f Control.
The parameter is available when operating the drive with OLVector.
The parameter is available when operating the drive with PM OLVector.
The parameter is available when operating the drive with PM AOLVector.
The parameter is available when operating the drive with EZ Vector.
Hex. Hexadecimal numbers that represent Modbus addresses to change parameters over network communication.
RUN The parameter can be changed settings during run.
Expert The parameter that is available in Expert Mode only.
*1
*1 Set A1-01 = 3 [Access Level = Expert Parameters] to display and set Expert Mode parameters on the keypad.
Note:
Gray icons identify parameters that are not available in the specified control method.
V/f
OLV
OLV/PM OLV/PM
AOLV/PM
EZOLV

Omron Q2V Series Specifications

General

Brand	Omron
Model	Q2V Series
Category	Inverter
Language	English