12.1 A: INITIALIZATION
432 SIEPCYEUOQ2V01A Q2V Technical Manual
12.1 A: INITIALIZATION
Parameters of group A: INITIALIZATION set the operating environment and operating conditions for the drive.
◆ A1: INITIALIZATION
A1 parameters set the operating environment and operating conditions for the drive. For example, these
parameters set the keypad language, the control method, and the parameter access level for the drive.
■ A1-00: Language Selection
No.
(Hex.)
Name Description
Default
(Range)
A1-00
(0100)
RUN
Language Selection
Sets the language for the LCD keypad.
0
(0 - 12)
Note:
• This parameter is only available when you use an LCD keypad or a Bluetooth LCD Keypad.
• When you use A1-03 [Init Parameters] to initialize the drive, the drive will not set this parameter to factory default.
0 : English
1 : Japanese
2 : German
3 : French
4 : Italian
5 : Spanish
6 : Portuguese
7 : Chinese
8 : Czech
9 : Russian
10 : Turkish
11 : Polish
12 : Greek
■ A1-01: Access Level
No.
(Hex.)
Name Description
Default
(Range)
A1-01
(0101)
RUN
Access Level
Sets user access to parameters. The access level controls which parameters the keypad will
display, and which parameters the user can set.
2
(0 - 3)
0 : Monitor only
Access to A1-00, A1-01, A1-04 [Password Input], and the U Monitors.
1 : Manual Setup
Access to A1-00, A1-01, A1-04, and parameters registered to A2-01 to A2-32 [MAN1 Param1 to MAN3
Param12].
2 : Standard Parameters
Access to all parameters, but not Expert Mode parameters.
3 : Expert Parameters
Access to all parameters including Expert Mode parameters.
Table 12.1 shows which keypad screens are available for each A1-01 settings.
To Next Page
Loading...
Need help?
General