Parameter Details
12
12.4 d: REFERENCE
SIEPCYEUOQ2V01A Q2V Technical Manual 523
Figure 12.59 Offset Frequency Operation
■ d7-01: Offset Frq 1
No.
(Hex.)
Name Description
Default
(Range)
d7-01
(02B2)
RUN
Offset Frq 1
Uses H1-xx = 0E [MFDI Function Select = Offset Frq 1] as a percentage of the Maximum Output
Frequency to add or subtract the set frequency to/from the frequency reference.
0.0%
(-100.0 - +100.0%)
■ d7-02: Offset Frq 2
No.
(Hex.)
Name Description
Default
(Range)
d7-02
(02B3)
RUN
Offset Frq 2
Uses H1-xx = 0F [MFDI Function Select = Offset Frq 2] as a percentage of the Maximum Output
Frequency to add or subtract the set frequency to/from the frequency reference.
0.0%
(-100.0 - +100.0%)
■ d7-03: Offset Frq 3
No.
(Hex.)
Name Description
Default
(Range)
d7-03
(02B4)
RUN
Offset Frq 3
Uses H1-xx = 10 [MFDI Function Select = Offset Frq 3] as a percentage of the Maximum Output
Frequency to add or subtract the set frequency to/from the frequency reference.
0.0%
(-100.0 - +100.0%)
To Next Page
Loading...
Need help?
General