6 Basic Parameter Settings
6 - 2
High-function General-purpose Inverter RX2 Series User’s Manual
6-4-2 Case where Command Is Given with LCD Operator . . . . . . . . . . . . . . . . . . .6-26
6-4-3 Case where Command Is Given from Terminal Block Analog Signals . . . . . .6-27
6-4-4 Case where Command Is Given through RS485 Communications . . . . . . . .6-28
6-4-5 Case where Command Is Given through Input of Pulse String . . . . . . . . . . .6-28
6-4-6 Case where Command Is Given through DriveProgramming . . . . . . . . . . . . 6-34
6-4-7 Case where Command Is Given with PID Control . . . . . . . . . . . . . . . . . . . . .6-34
6-4-8 Case where Command Is Given with Main Speed Command and
Auxiliary Speed Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-35
6-4-9 Case where Command Is Given with Multi-Step Speed . . . . . . . . . . . . . . . . 6-37
6-4-10 Temporal Addition of Frequency Command . . . . . . . . . . . . . . . . . . . . . . . . . .6-41
6-4-11 Up/Down Function (FUP, FDN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-41
6-4-12 Analog Command Hold Function (AHD) . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-42
6-4-13 Temporal Change of Frequency Command Destinations . . . . . . . . . . . . . . .6-43
6-5 Limit Frequency and Operation Commands . . . . . . . . . . . . . . . . . . . . . . . 6-44
6-5-1 Limit Frequency and Operation Commands . . . . . . . . . . . . . . . . . . . . . . . . .6-44
6-5-2 Limit Operation Command Direction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-45
6-5-3 Limit Output Direction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-45
6-5-4 Operation Permission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-46
6-6 Thermal Protection of Motor (Electronic Thermal) . . . . . . . . . . . . . . . . . . 6-48
6-6-1 Electronic Thermal Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-48
6-6-2 Monitoring of Motor Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-55
6-7 Acceleration/Deceleration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-56
6-7-1 Change Acceleration Time and Deceleration Time . . . . . . . . . . . . . . . . . . . .6-56
6-7-2 Switch Acceleration Time and Deceleration Time in Two Stages . . . . . . . . . .6-58
6-7-3 Switching of Acceleration or Deceleration Time with Multi-Speed Step . . . . .6-61
6-7-4 Holding Function of Acceleration/Deceleration . . . . . . . . . . . . . . . . . . . . . . .6-66
6-7-5 Change the Acceleration or Deceleration Pattern . . . . . . . . . . . . . . . . . . . . .6-67
6-7-6 Following Frequency Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-70
To Next Page
Loading...
Need help?
General