9 - 99
9 Communications Functions
High-function General-purpose Inverter RX2 Series User’s Manual
9-6 Inter-inverter Communication
9
9-6-1 Inter-inverter Communication Parameters
CF-26
Sender Register of All
Stations in EzCom
Communication 1
0000 to FFFF 0000 M
CF-27
Recipient Station
Number of All Stations
in EzCom Communi-
cation 2
1 to 247 2 M
CF-28
Recipient Register of
All Stations in EzCom
Communication 2
0000 to FFFF 0000 M
CF-29
Sender Register of All
Stations in EzCom
Communication 2
0000 to FFFF 0000 M
CF-30
Recipient Station
Number of All Stations
in EzCom Communi-
cation 3
1 to 247 3 M
CF-31
Recipient Register of
All Stations in EzCom
Communication 3
0000 to FFFF 0000 M
CF-32
Sender Register of All
Stations in EzCom
Communication 3
0000 to FFFF 0000 M
CF-33
Recipient Station
Number of All Stations
in EzCom Communi-
cation 4
1 to 247 4 M
CF-34
Recipient Register of
All Stations in EzCom
Communication 4
0000 to FFFF 0000 M
CF-35
Sender Register of All
Stations in EzCom
Communication 4
0000 to FFFF 0000 M
CF-36
Recipient Station
Number of All Stations
in EzCom Communi-
cation 5
1 to 247 5 M
CF-37
Recipient Register of
All Stations in EzCom
Communication 5
0000 to FFFF 0000 M
CF-38
Sender Register of All
Stations in EzCom
Communication 5
0000 to FFFF 0000 M
CA-01 to
CA-07
Input terminal 1 to 9,
A, B
98:
EzCom start
*7
A
*1. Below are the details of the setting target.
ALL: Setting required for all connected inverters
A: Setting required only for management inverter (Station No. 1)
B: Setting required for inverters other than management inverter (Station No. 1)
M: Setting required only for inverters set in CF-20 to CF-21 (= Inverters assigned with master role)
*2. After changing any of the CF-02, CF-08, and CF-20 to CF-22 data on the management inverter, be sure to
cycle the power supply to apply the changes. For inverters other than the management inverter, these changes
will be applied immediately.
Parameter No. Function name Data
Default
data
Unit
Setting
target
*1
To Next Page
Loading...
