Omron RX2 Series - Page 824

Appendices A Technical Information
A - 16
High-function General-purpose Inverter RX2 Series User’s Manual
b045 Torque LADSTOP selection bA116
Addition of individual settings for sec-
ond control
b046 Selection of reversal prevention HC114
Addition of individual settings for sec-
ond control
b050
Instantaneous power failure non-stop selec-
tion
bA-30
b051
Instantaneous power failure non-stop start-
ing voltage
bA-31
b052
Instantaneous power failure non-stop
OV-LADSTOP level (target voltage level)
bA-32
b053
Instantaneous power failure non-stop
deceleration time
bA-34
b054
Instantaneous power failure non-stop
deceleration start range
bA-36
b055
Instantaneous power failure non-stop pro-
portional gain setting
bA-37
b056
Instantaneous power failure non-stop inte-
grated time setting
bA-38
b060 Window comparator O upper limit CE-40
b061 Window comparator O lower limit CE-41
b062 Window comparator O hysteresis width CE-42
b063 Window comparator OI upper limit level CE-43
b064 Window comparator OI lower limit level CE-44
b065 Window comparator OI hysteresis width CE-45
b066 Window comparator O2 upper limit level CE-46
b067 Window comparator O2 lower limit level CE-47
b068 Window comparator O2 hysteresis width CE-48
b070 O operation level at disconnection CE-50
b071 OI operation level at disconnection CE-52
b072 O2 operation level at disconnection CE-54
b078 Deletion of integrated power UA-12
b079 Integrated power display gain UA-13
b082 Starting frequency Hb130
Addition of individual settings for sec-
ond control
b083 Carrier frequency bb101
Addition of individual settings for sec-
ond control
b084 Selection of initialization Ub-01
b085 Initialization data selection Ub-02
b086 Frequency conversion coefficient Ab-01
b087 Stop key selection AA-13
b088 Free-run stop selection bb-40
b089 Automatic carrier reduction bb103
Addition of individual settings for sec-
ond control
b090 BRD use rate bA-60
b091 Stop mode selection AA115
Addition of individual settings for sec-
ond control
b092 Cooling fan operation selection bA-70
b095 BRD selection bA-61
b096 BRD on level bA-62
b098 Thermistor selection Cb-40
b099 Thermistor error level bb-70
b100 Free V/f frequency 1 Hb150
Addition of individual settings for sec-
ond control
3G3RX-series V1 3G3RX2-series
Remarks
Display
code
Function name New code