Orolia SecureSync 2400 User Manual

can determine in which order (= priority) SecureSync calls upon its external time and 1PPS
references.
For additional information, see also "Input Reference Priorities" on page183.
Accessing the Reference Priority Screen
To access the Reference Priority Setup screen:
1.
Navigate to MANAGEMENT > OTHER: Reference Priority.
OR:
1.
On the HOME screen, click the GEAR icon in the Reference Status panel:
2.
The Configure Reference Priorities screen will display.
The Reference Priority screen is divided into 3 areas:
a.
The Actions panel, which provides a single action:
Restore Factory Defaults
b.
The Configure Reference Priorities panel, which displays the priority of
SecureSync’s references in a table form.
In this panel you can:
Add and configure new references
Delete references
Enable/disable references
Note: It is also possible to disable and enable References via the front
panel display. Navigate to Inputs Menu > Settings and select the ref-
erence you would like to enable or disable using the ENTER key. You will
then be able to edit the STATE to either on or off. To confirm you choice,
press the ENTER key Press ENTER again in the confirmation menu.
Reorder the priority of SecureSync’s references
3.3 Managing References
CHAPTER 3 • SecureSync 2400 User Manual Rev. 2
185

Orolia SecureSync 2400 Specifications

General

Brand	Orolia
Model	SecureSync 2400
Category	Recording Equipment
Language	English