view each input reference
view reference state, time, validity, and phase error
Time Menu:
Settings:
change the current time display
Monitoring:
view the oscillator type, disciplining state, and TFOM value
Outputs Menu:
Settings
view list of outputs available
see outputs format
enable or disable outputs (see "Signature Control" on page161)
Network Menu:
Settings: Scroll to each ETH connection to view information or perform actions (see
"Setting Up an IP Address via the Front Panel" on page51):
enable or disable DHCP
view or set IP address
view or change gateway
view MAC address
10
CHAPTER 1 • SecureSync 2400 User Manual Rev. 2
1.3 SecureSync Front Panel
To Next Page
Loading...
Need help?
General
