3.
The LDAP Setup window will display.
4.
There will be 5 tabs from which to choose:
Servers: This is where you identify the LDAP server to be used.
Settings: This is where you set up the general LDAP Distinguished Name and
Bind settings.
Security: This is where you upload and manage the CA server certificate, CA
client certificate and CA client key.
Group: This is where you enable/disable group-based authentication.
Advanced: This is where you set up your search filter(s) and login attribute.
LDAP Servers Settings
Under the Servers tab, you manage the LDAP server(s) to be accessed:. It is necessary to
add a server before other settings are configured.
4.3 Managing Users and Security
CHAPTER 4 • SecureSync 2400 User Manual Rev. 2
261
To Next Page
Loading...
