Orolia SecureSync 2400 User Manual

System Status panel
Reference—Indicates the status of the current synchronizing reference, if any.
Power—Indicates whether the power is on.
Status—Indicates the status of the network’s timing. There are three indicators in
the Status field:
Sync—Indicates whether SecureSync is synchronized to its selected input ref-
erences.
Green indicates SecureSync is currently synchronized to its ref-
erences.
Orange indicates SecureSync is not currently synchronized to its ref-
erences.
Hold—When lit, SecureSync is in Holdover mode.
Fault—Indicates a fault in the operation of the SecureSync. See
"Troubleshooting via Web UI Status Page" on page327 for instructions for
troubleshooting faults.
Alarm Status: If a major or minor alarm is present, it will be displayed here.
NTP—Current STRATUM status of this SecureSync unit.
Temperature—The current board temperature will be displayed here.
Reference Status panel
4.5 Quality Management
CHAPTER 4 • SecureSync 2400 User Manual Rev. 2
281

Orolia SecureSync 2400 Specifications

General

Brand	Orolia
Model	SecureSync 2400
Category	Recording Equipment
Language	English