Orolia SecureSync 2400 User Manual

Monitoring all outputs of a specific type
To monitor all the outputs of a particular category (PPS, for example) simultaneously:
1. Navigate to INTERFACES > OUTPUTS, and click the desired output category ( not
recessed e.g., PPS Output):
2.
The Status window will display a list of all outputs of the selected category:
To display more detailed information about a particular output, click the cor-
responding INFO button.
To edit the settings of a given output, click the GEAR button (see also "Configuring
Outputs" on page148.)
To refresh the information displayed, click the REFRESH button (circling arrows
icon).
In the illustration of the rear panel, click on a connector to highlight the cor-
responding list entry.
Displaying the settings of a specific output
The outputs installed in your SecureSync unit have specific settings that can be reviewed,
and—to some extent—edited.
288
CHAPTER 4 • SecureSync 2400 User Manual Rev. 2
4.5 Quality Management

Orolia SecureSync 2400 Specifications

General

Brand	Orolia
Model	SecureSync 2400
Category	Recording Equipment
Language	English