Orolia SecureSync 2400 User Manual

The fields displayed are:
Signature Control: Displays the current configuration of Signature Control. See
"Signature Control" on page161.
Frequency: Indicates the configured frequency of the 1PPS output signal.
Offset: Displays the configured Offset (to account for cable delays or other laten-
cies).
Edge: Shows if the on-time point of the 1PPS output is the rising or falling edge of
the pulse.
Pulse Width: Displays the configured Pulse Width of the 1PPS output. The Pulse
Width is displayed in nanoseconds (ns). The default Pulse Width is 200 milliseconds.
1PPS Input: Edit Window
To configure the settings of the PPS Input (also referred to as ‘Reference’), go to its Edit
window. For instructions, see: "Configuring Option Card Inputs/Outputs" on page336.
The Web UI list entries for these cards are:
1PPS In/Out
1PPS In/Out, Fiber
The connector number for the input is: J1
The Edit window allows the configuration of the following settings:
SecureSync 2400 User Manual 361
APPENDIX

Orolia SecureSync 2400 Specifications

General

Brand	Orolia
Model	SecureSync 2400
Category	Recording Equipment
Language	English