Plockmatic BM500 - REP 10.2 Infeed Cover

Plockmatic BM3050 system 27 August 2019 3. Repairs and adjustments (REP and ADJ)
3-68
REP 10.2 Infeed Cover
Parts List on PL 11.1
Removal
1. Turn off the main power and disconnect the power cord.
2. Undock from BM and SQF (REP 1.0 Undocking BM / TR / SQF).
3. Remove Front and Rear Cover (REP 10.0 Front and Rear Cover).
4. In the front, remove screws (x3) [A].
5. In the rear, remove screws (x3) [B].
6. Remove Infeed Cover.
Replacement
1. Reverse removal procedure.
[B]
[A]