Plockmatic BM500 - BST4000-1 Belt Stacker Installation; Installation Procedure

Plockmatic BM3050 system 27 August 2019 1. Installation Procedure
1-46
1.11 BST4000-1 BELT STACKER INSTALLATION
• This section describes how to install a BST4000-1 Belt Stacker Module.
• If you don’t have this option, go to next section.
1.11.1 INSTALLATION PROCEDURE
1. Locate the orange cable inside the frame, plug in and secure connec-
tor.
2.
x 8
3.