Plockmatic BM500 - REP 15.32 Drive Shaft, Exit Feed; REP 15.33 Idler Shaft, Exit

Plockmatic BM3050 system 27 August 2019 3. Repairs and adjustments (REP and ADJ)
3-258
1. Remove Cover, Rear (REP 15.0)
2. Remove Cover, Front (REP 15.1)
3. Remove Cover, Top (REP 15.5)
4. Remove screw [B] and loosen screw [C]
5. Fold down the guide pulley bracket
6. Remove screw, axial lock [D]
7. Remove drive shaft [A]
1. Idler shafts [A] (dotted line = not visible)
2. Remove Cover, Front (REP 15.1)
3. Remove spring [B]
4. Remove retaining rings [C]
5. Remove bearing blocks [D] and idler shaft.
A
C
B
Replacement
Reverse removal procedure
Replacement
Reverse removal procedure
D
A
B
C
D
(VF602 Spare Parts Manual, PL3.1A Item B) (VF602 Spare Parts Manual, PL3.1A Item A)
REP 15.32 Drive Shaft, Exit Feed REP 15.33 Idler Shaft, Exit