Plockmatic BM500 - Compiler RAP; Stapler RAP

Plockmatic BM3050 system 27 August 2019 4. Troubleshooting (RAP)
4-182
Stapler RAP
This RAP is for troubleshooting the Stapler.
You should have been re-directed to this RAP from another Status indicator RAP.
Procedure
Check stapler left (M20) (Pl 4.1) and stapler right (M21) (PL 4.1) according to GP4.
Is the stapler working correctly?
Y N
• Check for mechanical bindings, broken, missing or loose parts.
• Check staple position to clincher (BQ 4).
• Go to BM-401
Return to the previous RAP.
Compiler RAP
This RAP is for troubleshooting the Compiler.
You should have been re-directed to this RAP from another Status indicator RAP.
Procedure
Check Sensor BM-Q1 (PL 5.3) according to GP4.
Is Sensor Q1 working correctly?
Y N
Go to BM-062 Paper Infeed sensor BM-Q1 Faulty.
Are the two outer back joggers nger in their right position (REP 3.7).
Y N
 Positionthetwoouterbackjoggerngersintheircorrectposition
(See REP 3.7 Back Jogger assembly).
Check Motor M2 (PL 3.2) according to GP4.
Is the back jogger working correctly?
Y N
Check for mechanical bindings, broken, missing or loose parts.
Check Motor M1 (PL 3.2) according to GP4.
Is the M1 feed roller working correctly?
Y N
Check for mechanical bindings, broken, missing or loose parts.
Check Motor M3 (PL 3.2) according to GP4.
Are the side joggers working correctly?
Y N
Check for mechanical bindings, broken, missing or loose parts.
Return to the previous RAP.