Plockmatic BM3050 system 27 August 2019 3. Repairs and adjustments (REP and ADJ)
3-9
Recommended tools
Supplied with the Booklet Maker:
• 24 mm spanner/box or open end wrench.
• 17 mm spanner/box or open end wrench.
• Torx T20 driver, min 115mm (4.5”) long. Preferably magnetic.
NOTE:
Supplied tools are located behind the Booklet Maker front
cover. Actual look may differ.
You will also need:
• 5.5, 7, 10 13 and 19mm spanner/box or open end wrench
• 8mm spanner/box or open end wrench or hex nut driver
• 1.5, 2, 2.5, 3, 4, 5mm allen keys
• Flat blade screwdriver size 4 or 5
• Circlip pliers
• Metric feeler gauge set
• Metric sliding caliper
To Next Page
