Plockmatic BM3050 system 27 August 2019 3. Repairs and adjustments (REP and ADJ)
3-153
REP 12.39 Registration Width Adjustment Motor (CT-M4)
Parts List on PL 12.8
Removal
1. Turn off the main power and disconnect the power cord.
2. Remove the Rear Cover (REP 12.0 Front and rear cover).
3. Unlatch and pull out the Slide.
4. Remove screw and fold out PCB plate [A].
5. Disconnect motor plug D.P2 on Stepper motor driver PCB “D” [B].
6. Free harness from tie wraps [C].
7. Remove motor screws (x4) [D] .
8. Remove Registration Width Adjustment Motor (CT-M4) [E].
Replacement
1. Reverse removal procedure.
[A]
[C]
[D]
[E]
To Next Page
