DOB 1300-1556 | X3-45 Commuter PA-1648 Maintenance Manual Section 06 revised release October 2021
FIGURE 43: GROUND CABLE
7. To keep the battery connections clean,
make sure that battery bank cover leans
perfectly on the cable guides and the
angles.
DANGER
To prevent possible electric shock or sparking,
the main electrical shut-off switch must be set
to the “Off” position before tightening an
electrical connection.
A pro
tective coating should be applied on
certain power connections that have been
disconnected. Refer to Procedure SAV00002E
included at the end of this section to know the
recommended products and where they are
used.