PREVOST X3-45 COMMUTER User Manual

SECTION 00 : GENERAL INFORMATION
DOB 1300-1556 | X3-45 Commuter PA-1648 Maintenance Manual First release Oct 2020
17
4.6 HOSE CLAMP TORQUE
ENGLISH: HOSE CLAMP
DESCRIPTION
CONSTANT
TORQUE
RECOMMENDED TIGHTENING
(LB-IN)
DRY
3/8 Hex 90-110
ENGLISH:
HOSE CLAMP (WAVE
SEAL AND BREEZE)
DESCRIPTION
CONSTANT TORQUE
RECOMMENDED
TIGHTENING (LB-IN)
DRY
5/16 Hex 55-65
METRIC:
HOSE CLAMP
(CAILLAU)
RECOMMENDED
TIGHTENING (LB-IN)
DRY
7 mm Hex 30±2.2
CAUTION
Cover electronic control components and wiring
to protect from hot sparks, etc.
CAUTION
Position welding machine ground clamp as
close as possible to the work. Ensure that the
w
elding machine ground return clamp is well
secured and makes a good electrical contact
with a large metallic area of the chassis located
as close as possible to the welding point.
CAUTION
Do not use TIG welding process on the vehicle.
This high freque
ncy current process can
seriously damage the electronic components.
Refer to Multiplex Modules Disconnection
Procedure Prior to Welding annexed at the end
of this section.

PREVOST X3-45 COMMUTER Specifications

General

Engine	Volvo D13
Transmission	Allison B500
Fuel Type	Diesel
Length	45 ft (13.7 m)
Width	102 in (2.6 m)
Horsepower	500 hp
GVWR	54, 000 lbs
Height	141 in