Mi14-01E Page 11 / 38 Rev: Oct 2021
2.1 BEFORE TOWING PREPARATION
1. S
et the transmission to neutral and apply
parking brake.
2. Chock the front and rear wheels to prevent the
bus
from moving at time of releasing the
parking brake during the towing preparation.
3.
On the L.H. dashboard panel, turn on the
hazard warning flashers. Pre
towing light bar.
Figure 19: CHOCK THE FRONT AND REAR WHEELS
4. Place the front wheels in a straight-ahead
position and keep the steeri
turning. To do so, slide the driver’s seat close
to the steering wheel. W
around and through the steering wheel and
then fasten safety belt.
This will assure the bus to
direction and eventually to be stopped by the
tow truck in the eventuality of a mechanical
failure of the tow truck lifting equipment.
Figure 20