DOB 1300-1556 | X3-45 Commuter PA-1648 Maintenance Manual First release Oct 2020
67
10.5.4 Evaporator Compartment Door
FIGURE 125: EVAPORATOR DOOR
For the adjustment of an evaporator door, you
will need:
 Centering tool G34148_500
EVAPORATOR DOOR ADJUSTMENT
FIGURE 126: VEHICLE XYZ DIRECTIONS
15. Loosen the screws fixing the hinge to the
door. Loosening these screws allows
evaporator door to be adjusted in the ‘’X’’
and ‘’Z’’ directions on the hinge side.
FIGURE 127: HINGE MOUNTING SCREWS
16. Adjust the door in the middle of the opening
in the ‘’X’’ direction.
17. For the ‘’Z’’ direction, adjust the top of the
door panel between 5.5 and 6 mm from the
horizontal trim as shown in Figure 128.