SECTION 22: HEATING AND AIR CONDITIONING
DOB 1300-1556 | X3-45 Commuter PA-1648 Maintenance Manual First release Oct 2020
FIGURE 23: EVAPORATOR MOTOR BOLTS 22315
• Install the complete unit on a work bench,
unfasten the fan square head set screws, the
Phillips head screws retaining cages to base
and slide out the assemblies from the
evaporator motor output shaft.
• Remove motor from double blower fan unit
base.
FIGURE 24: EVAPORATOR MOTOR ASSEMBLY
4.2.2 Installation
To reinstall the evaporator motor, reverse
"Evaporator Motor Removal" procedure.