SECTION 10: FRONT I-BEAM AXLE
DOB 1300-1556 | X3-45 Commuter PA-1648 Maintenance Manual First release Oct 2020
8. ALIGNMENT SPECIFICATIONS
Use static wheel alignment systems which work with angle measurements only, such as Josam or Hunter
systems. Static alignment specifications are listed in the following tables:
FRONT WHEEL ALIGNMENT SPECIFICATIONS WITH I-BEAM AXLE
Front Wheel Alignment Minimal Nominal Maximal
Camber, (degrees)
R.H. and L.H. *
-0.250 0.125 0.375
Caster, (degrees)
R.H. and L.H.
2 2.75 3.5
Total toe (A minus B),
(degrees)
0.04 0.06 0.08