PREVOST X3-45 COMMUTER User Manual

SECTION 11: REAR AXLES
8
DOB 1300-1556 | X3-45 Commuter PA-1648 Maintenance Manual Section 11 revised Jan 2021
specified by the Lubrication And Servicing
Schedule in Section 24A.
2.1.5 Compact bearing (hub unit) Grease
Change
Perform compact bearing (hub unit) grease
change as described in paragraph 7.3 GREASE
CHANGE IN THE HUB of the following manual:
OPERATING INSTRUCTIONS ZF AXLE A132
(version with US hub) #5871 207 982 EN.
MAINTENANCE
Compact bearing (hub unit) axial play – ZF
Lubricant class 12H
The compact bearing grease must be change
at the interva
ls specified by the Lubrication
And Servicing Schedule in Section 24A.
The list of approved Lubricant Class 12H
grease types is found in ZF’s list of lubricants
TE-ML 12.
2.1.6 Speed Sensors (Anti-Lock Brake
system, ABS)
For removing and installing the drive axle speed
sensors (for anti-lock brake systems, ABS), refer
to Section 12: Brake and Air System.
2.2 DRIVE AXLE FLANGE SHAFT
REMOVAL/INSTALLATION
Refer to paragraphs 9-Towing and 11-
Replacement of Axle Insert in the following
manuals, included on your vehicle USB flash
drive:
• OPERATING INSTRUCTIONS ZF AXLE A132 (version
with US hub) #5871 207 982 EN.

PREVOST X3-45 COMMUTER Specifications

General

Engine	Volvo D13
Transmission	Allison B500
Fuel Type	Diesel
Length	45 ft (13.7 m)
Width	102 in (2.6 m)
Horsepower	500 hp
GVWR	54, 000 lbs
Height	141 in