PREVOST X3-45 COMMUTER User Manual

SECTION 18: BODY
10
DOB 1300-1556 | X3-45 Commuter PA-1648 Maintenance Manual First release Oct 2020
7.3 RUST INHIBITOR APPLICATION
Material: Tectyl 185 GW R1KG21
Safety Rules: Use safety glasses
Supplied air hood
Solvent-resistant rubber gloves
1.0 Wash both wheelhousing mechanical parts before
masking.
A water-hose nozzle is recommended. Water may be
hot to reduce washing time especially during winter. If
parts are soiled with oil, clean using R1KG21. Avoid
rubber parts.
2.0 Dry all water sprayed parts. Surface temperature
and dew point must be respected before applying rust
inhibitor.
Air pressure system may be used, refer to annex 1 for
surface temperature and dew point.
3.0 Front wheelhousing
a) Mask all rubber joints. Braking system must also be
protected (refer to arrows). Commercial aluminum foil
may be used for masking.
3.1 Front wheelhousing
Front view

PREVOST X3-45 COMMUTER Specifications

General

Engine	Volvo D13
Transmission	Allison B500
Fuel Type	Diesel
Length	45 ft (13.7 m)
Width	102 in (2.6 m)
Horsepower	500 hp
GVWR	54, 000 lbs
Height	141 in