DOB 1300-1556 | X3-45 Commuter PA-1648 Maintenance Manual First release Oct 2020
37
Ask an assistant to help you to perform the
following adjustments.
3. Adjust the door horizontally and vertically
with the jack. Tighten the bolts. Remove the
jack and the wooden block.
FIGURE 55: DOOR PANEL ADJUSTMENTS
o Depth adjustment
1. Support the door panel with a wooden block
and a hydraulic jack.
2. Unfasten and then disconnect rod ends from
door panel fixing plates. Screw or unscrew
rod end in order to adjust door panel depth.
3. Tighten the bolts. Remove the jack and the
wooden block
• Lubrication
Part Lubricant Frequency
ï‚§ Latches
ï‚§ Upper door catch
ï‚§
Door cylinder rod
end with bearing grease
fitting
Low
temperature
grease
Every six
months
ï‚§ Door locking
mechanism
White
grease
Every six
months
ï‚§ Key hole
ï‚§ Damper pins
ï‚§ Hinges
Low
viscosity oil
Every six
months