DOB 1300-1556 | X3-45 Commuter PA-1648 Maintenance Manual First release Oct 2020
63
Using a plastic spatula, apply some Sika 221
gray onto the damaged area.
Remove masking tape and protection around
damaged area.
Spray pure water onto Sika. Use a floor sample
to create some texture onto the adhesive.
If possible spray some more water onto the
adhesive to accelerate curing.
Allow drying for at least 2 hours then repaint as
per paragraph: Minor Repair.
• Baggage Compartment Floor Installation
Preparation and Installation
Clean baggage compartment support structure
using anti-silicone.
Glue spacers (790392) about 16 inches apart.
Rear baggage compartment without WCL.