PREVOST X3-45 COMMUTER User Manual

SECTION 18: BODY
DOB 1300-1556 | X3-45 Commuter PA-1648 Maintenance Manual First release Oct 2020
95
Section D Sika Primer 215
1. Shake bottle to mix product
2. Apply a thin layer
3.
Allow drying
Mandatory
215
Minimum time : 20 minutes
After 2 hours : Remove dust using damp cloth (pure water)
Before applying any other
product
If surface seems dusty, dust using damp cloth.
If surface seems greasy or with finger marks, reactivate with Aktivator.
PREPARATION OF FIBERGLASS
1. Clean using anti-silicone (refer to Section A).
2. Apply Sika 205 (refer to Section B).
Section B Sika 205
1. Apply
2. Allow drying
Mandatory
Minimum
time
- For a smooth surface (aluminum, stainless, steel,
fiberglass (gelcoat side), etc.):
2 minutes
- For a porous surface (fiberglass (non gelcoat side),
etc.)
10 minutes
After 2 hours : Reactivate surface with Sika 205
Before applying any other
product
If surface seems dusty, greasy or with finger marks, start
operation again.
CHIX cloth
CHIX cloth

PREVOST X3-45 COMMUTER Specifications

General

Engine	Volvo D13
Transmission	Allison B500
Fuel Type	Diesel
Length	45 ft (13.7 m)
Width	102 in (2.6 m)
Horsepower	500 hp
GVWR	54, 000 lbs
Height	141 in