Analog modulations
R&S
®
SMA100B
111User Manual 1178.3834.02 ─ 09
5.4.5 Pulse graph
Option: see Chapter 5.1, "Required options", on page 81.
Access:
► Select "Modulation" > "Pulse Modulation > Pulse Graph".
The pulse graph is the graphical representation of the current pulse signal.
The height of the bars corresponds to the selected amplitude of the pulse signal.
File Name
Indicates the name of the pulse train data file.
To create or select a file, see "Pulse Train Data" on page 106.
Remote command:
[:SOURce<hw>]:PULM:TRAin:SELect on page 589
Zooming
You can zoom into the diagram to visualize the graph in more detail:
●
"Zoom Position": Sets the focus on the time axis where to enlarge the graph.
●
"Zoom In": Enlarges the graph at the selected position.
●
"Zoom Out" for the reverse operation.
Modulation settings
To Next Page
Loading...
