R&S SMA100B - FM, Phim and am Modulation Settings

Analog modulations
R&S
®
SMA100B
86User Manual 1178.3834.02 ─ 09
Remote command:
[:SOURce<hw>]:PULM:SOURce on page 585
Transition Type
Selects between "Fast" or "Smoothed" slew rate (slope).
"Fast"
Enables fast transitions with shortest rise and fall times.
"Smoothed"
Flattens the slew rate, resulting in longer rise / fall times. Use this
mode if you are working with devices that are sensitive to steep
slopes.
Note: The R&S SMA100B supports this functionality up to a certain
frequency, depending on the installed frequency options, see also
"Interactions and characteristics" on page 83.
For more information, see data sheet.
Remote command:
[:SOURce<hw>]:PULM:TTYPe on page 585
5.4.2 FM, PhiM and AM modulation settings
Option: R&S SMAB-K720
Access:
► Select "Modulation" > "Amplitude Modulation/Frequency Modulation/Phase Modu-
lation".
The "FM", "ΦM" and "AM" tabs contain the parameters per modulation type.
Modulation settings