EasyManua.ls Logo

R&S SMA100B - Remote Control Interfaces and Protocols

R&S SMA100B
822 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Network operation and remote control
R&S
®
SMA100B
380User Manual 1178.3834.02 ─ 09
Remote device VNC client Requirements Characteristics
Web browser with HTML5
Web sockets must be supported. Slower than the other modes.
No additional installation or acti-
vation required.
No security concern.
Smart device
(Tablet/ smartphone)
Dedicated client App
App must be installed. Fast, supports several options like
full screen mode or auto-login.
Web browser with HTML5
Web sockets must be supported. Support of QR code scanning
Slower than a dedicated App.
Remote file access (FTP, SAMBA/SMB)
A remote client accesses the instrument's file system, using the protocols FTP (file
transfer protocol) and SAMBA/SMB (server message block).
The protocols enable you to transfer files from or to the instrument and to get direct
access to its file sharing directory share.
How to:
Chapter 11.9, "How to transfer files from and to the instrument", on page 330.
"Activating SMB version 1.0/2.0 client and server" on page 374
13.2 Remote control interfaces and protocols
The instrument supports various interfaces for remote control. Table 13-2 gives an
overview on the connectivity:
Table 13-2: Remote control interfaces and protocols
Interface
Protocols, VISA
*)
address string and library
Remarks
Local area network
(LAN)
HiSLIP High-Speed LAN Instrument Protocol
(IVI-6.1)
TCPIP::host address::hislip0[::INSTR]
VISA
VXI-11
TCPIP::host address[::
LAN device name][::INSTR]
VISA
Socket communication (Raw Ethernet, simple
Telnet)
TCPIP::host address[::
LAN device name]::<port>::SOCKET
VISA or socket controller
The LAN connector is at the rear panel of the
instrument.
The interface is based on TCP/IP, see Chap-
ter 13.2.1, "LAN interface", on page 381 for
details on the address information.
USB
USBTMC
USB::<vendor ID>::<product ID>::
<serial number>[::INSTR]
VISA
The USB In connector is at the rear panel of the
instrument.
For a description of the interface, see Chap-
ter 13.2.2, "USB interface", on page 383
Remote control interfaces and protocols

Table of Contents

Other manuals for R&S SMA100B

Related product manuals