R&S SMA100B - List Editor

List and sweep mode
R&S
®
SMA100B
207User Manual 1178.3834.02 ─ 09
Remote command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:CATalog? on page 675
[:SOURce<hw>]:LIST:DEXChange:AFILe:SELect on page 676
[:SOURce<hw>]:CORRection:DEXChange:AFILe:CATalog? on page 640
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect on page 641
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:CATalog? on page 591
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SELect on page 591
Select Source/Select ASCII Destination
In "Mode > Export", access the file select dialog that provides standard file handling
functions.
Where:
●
"Select Source": selects the file to be exported
●
"Select ASCII Destination": defines the filename and the file path for the exported
file
Remote command:
[:SOURce<hw>]:LIST:DEXChange:SELect on page 677
[:SOURce<hw>]:CORRection:DEXChange:SELect on page 642
[:SOURce<hw>]:PULM:TRAin:DEXChange:SELect on page 592
Import / Export
Imports or exports the selected data list file, depending on the current mode.
Remote command:
[:SOURce<hw>]:LIST:DEXChange:EXECute on page 675
[:SOURce<hw>]:CORRection:DEXChange:EXECute on page 641
[:SOURce<hw>]:PULM:TRAin:DEXChange:EXECute on page 592
7.7 List editor
The "User Correction" and "List Mode" dialogs provide a build-in list editor for defining
the corresponding value pairs.
The table and navigation functions of the UCOR and list mode editors have the same
structure and are therefore summarized below. The access is specified for both modes,
the fields and functions are explained using the example of the list mode.
Access to "Edit List Mode Data":
► "Sweep" > "List Mode" > "List Mode Data" > "Edit List Mode Data"
The editor for list mode provides a table with RF frequency and power values, an
extra column for defining variable dwell times, and standard navigation functions.
List editor